6.0×3.5mm Compact Type (Snap-in) SKHL Series
|
| |
 |
A vertical and horizontal type switch contributing to high density mounting.
 Applications Office device
|
Detail
Horizontal type
| Type |
Snap-in |
| Operating force |
1.57N |
| Operating direction |
Horizontal |
| Travel |
0.25mm |
Operating life
(5mA 5V DC) |
50,000 cycles |
| Initial contact resistance |
500mΩ max. |
| Stem color |
Dark gray |
| Terminal length |
l=3.5mm
(PC board t: 1.6) |
| Minimum order unit (pcs.) |
1,000 |
| Series type |
Sharp feeling type |
| Operating temperature range |
-30℃ to +85℃ |
| Rating (max.) |
50mA 12V DC |
| Rating (min.) |
10µA 1V DC |
| Electrical performance |
Insulation resistance |
100MΩ min. 100V DC |
| Voltage proof |
250V AC for 1 minute |
| Durability |
Vibration |
10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively |
| Environmental performance |
Cold |
-30±2℃ for 96h |
| Dry heat |
80±2℃ for 96h |
| Damp heat |
60±2℃, 90 to 95%RH for 96h |
| Certificate of Compliance to RoHS regulations |
|
Photo Stem color : Dark gray
Dimensions
Mounting Hole Dimensions
| |
| |
| Viewed from mounting face. |
|
|
Circuit Diagram
Packing Specifications
| Number of packages (pcs.) |
1 case / Japan |
10,000 |
| 1 case / export packing |
30,000 |
| Export package measurements (mm) |
309×476×347 |
Soldering Conditions
| |
| Items |
Condition |
| Flux built-up |
Mounting surface should not be exposed to fluk |
| Preheating temperature |
Ambient temperature of the soldered surface of PC board.
100℃ max. |
| Preheating time |
60s ax. |
| Soldering temperature |
260℃ max. |
| Duration of immersion |
5s max. |
| Number of soldering |
2times max. |
|
|
| |
| Items |
Condition |
| Soldering temperature |
350℃ max. |
| Duration of soldering |
3s max. |
| Capacity of soldering iron |
60W max. |
|
|
| |
1. Consult with us for availability of TACT switch™ washing. |
|
| |
2. Prevent flux penetration from the top side of the TACT switchTM. |
|
| |
3. Switch terminals and a PC board should not be coated with flux prior to soldering. |
|
| |
4. The second soldering should be done after the switch returns to normal temperature. |
|
| |
5. Use the flux with a specific gravity of at least 0.81.
(MH-820V or CF220V by TAMURA Corporation, or their equivalents.) |
|
 |
表示本系列共通的注释。 |
| |
- 本产品目录中产品的颜色，与实物的颜色有所差异。
- 请以最小订购单位的N(整数）倍来订货。
- 本系列产品也可以用于车载。
的使用温度范围设定虽然比通常的大，但是请在使用时仔细确认正式的技术规格书。
|
深圳华桑电子中国一级ALPS代理，JST代理：alps开关,alps编码器,alps传感器,alps中空轴,alps电位器,alps非球面玻璃透镜,jst连接器。
